DALI & Push Dimmable 2 in1 Led Driver
·Input Voltage: 100-277VAC & 180-240VAC
·Power Range:25-75W
·High Efficiency: up to 88% ; PF>0.95
·IP20 Design; Flicker-free
·Dimming range: 0-100%, LED Start at 0.1% possible
·Cooling by free air convection
·Dimming function: Built in DALI interface dimming function conform to
Dali Protocl IEC62386
·Push dimming function
·Protection:short circuit/over loading/over current/ Over temperature
·7 years warranty
| Model No. | Power | Output Voltage | Output Current | Weight(kg) | Size(L*W*Hmm) | Packing |
OTM-TD25-DP-12 OTM-TD25-DP-24 | 25W
| 12v 24v | 2.08A 1.04A | 0.2 | 155*54*20 | 350*240*130mm,40PCS/CTN |
OTM-TD50-DP-12 OTM-TD50-DP-24 | 50W | 12v 24v | 4.17A 2.08A | 0.35 | 178*60*24 | 290*215*140mm,20PCS/CTN |
OTM-TD75-DP-12 OTM-TD75-DP-24 | 75W | 12v 24v | 6.25A 3.13A | 0.45 | 180*60*36 | 355*215*215mm 20PCS/CTN |
Specifications
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed |
| Over Current | ≤1.2*Iou |
| Over Loading | ≦120% shut down o/p voltage, re-power on to recover |
| Over temperature | 100℃± 10℃ shut down o/p voltage ,re-power on to recover |
| Environment | Working TEMP. | -40～+70℃ |
| Working Humidity | 20～90%RH, non-condensing |
| Storage TEMP. Humidity | -40～+80℃，10～95%RH |
| TEMP .coefficient | ±0.03%/℃（0～50℃） |
| Vibration | 10～500Hz，2G 10min./1 cycle,period for 72min. each along X,Y,Z axes |
| Safety& EMC | Safety standards | UL8750+UL1310 Class 2 unit , EN61347-1 EN61347-2-13 |
| Withstand voltage | I/P-O/P:3.75KVAC |
| Isolation resistance | I/P-O/P：100MΩ/500VDC/25℃/70%RH |
| EMC EMISSION | EN55015,EN61000-3-2,3 (≧60%loading),FCC Part 15 B |
| Notes | All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature. Tolerance: includes set us tolerance, line regulation and load regulation . The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance
will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete
installation again. Loading range from 10% to 100%.
|
Package
Dimensions
Driver Connecting Diagram
