96W contsant voltage 24V 36V 48V
Supports dimming linear bicolor Triac dimmable/0-10v/1-10v/10v PWM/Potentiometer( 5 in 1) dimmable LED Driver
Spec sheet Download
96W 5 in 1 Dimmable LED driver Supports dimming linear bicolor Triac/0-10V/1-10V/Potentiometer/10V PWM
Features:
·Output constant voltage
·UL cUL listed, Class 2, Class P, FCC, CE, RoHs, T24, SAA
·Universal input, 110-277Vac
·Build in active PFC, typical power factor>0.95, THD<10%@120V Max. load
·High efficiency : up to 90%
·Load: 0.01-100%
·Short-circuit, over-temperature, over-load protection
·Full protection metal case, for dry, damp, wet location
.Plastic enclosures can be used indoors
·Flicker-free
·Suitable for LED lighting and moving sign applications
Product advantage：
•Dim-all: Triac/0-10V/1-10V/10V PWM/Potentiometer |
•Switch to PWM or Voltage Reduce output |
•Dimming effect: Voltage Reduce mode: 100%-0.01% dim, stepless dimming,flicker-free, PWM dim mode:100-0.1% dim, flicker-free |
•Triac dim mode: Forward phase & reverse phase, MLV, ELV dim |
•Exclusive patent design of “Clamshell” junction box,low-profile logo |
•Flexible wiring compartment to adjust the AC and DC wiring space |
•Metal shell NEMA 4X for indoor and outdoor use; Wet, damp, and dry location |
•Title 24 JA8 compliant |
•Constant voltage type, fine tune of output voltage |
•Super low loading request, works perfect at 0.01-100% load. |
•7 years warranty |
•Dimming range: 100%-0.01% Ultra Deep Amplitude |
•No Vpeak-peak during driver on/off and dimming, no harm to the LED for long-term using, and slow down the speed of lumen depreciation. |
•Works with single channel CCT warm-dim LED strip/tape (2 wires),Or works with dual channel CW color temperature LED strip/tape (3wires). |
•Switching different output mode, can be compatible with more different types of LED lamps |
•Compatible with DC-DC design LED fixture, such as MR16, PAR, wall washer, linear lighting, LED strip/type |
Model | OTM-TDJ96-E24 | OTM-TDJ96-E36 | OTM-TDJ96-E48 | |
Certificates | UL, cUL listed, Class 2 unit, Type HL rated, FCC NEMA 4X,T24,SAA | |||
Output | DC Voltage | 24V | 36V | 48V |
Rated Current | 4A
| 2.67A | 2A | |
Rated Power | 96W | |||
Voltage Tolerance | ±0.5V | |||
Voltage Regulation | ±0.5% | |||
Load Regulation | ±1% ±1% | |||
Input | Voltage Range | 110-277VAC | ||
Frequency Range | 47-63Hz | |||
Power Factor（Typ.）@ full load | 0.98@120VAC 0.97@277VAC | |||
THD（Typ.）@ full load | <20% @120VAC &277VAC | |||
Efficiency（Typ.）@ full load | 87% @120Vac 90%@277Vac
79% | |||
AC Current（Max.） | 1.04A@100Vac | |||
Inrush Current （Typ.） | 7A, 50%, 420us @120Vac 12A, 50%, 480us @277Vac | |||
Leakage current | <0.50mA | |||
Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | ||
Over Loading | ≤120% shut down o/p voltage, re-power on to recover after fault condition is removed | |||
Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling.
| |||
Environment | Working TEMP. | -40～+60℃ (see below derating curve) | ||
Working Humidity | 20～90%RH, non-condensing | |||
Storage TEMP. Humidity | -40～+80℃，10～95%RH | |||
TEMP .coefficient | ±0.03%/℃（0～50℃） | |||
Vibration | 10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
| |||
Safety& EMC | Safety standards | UL8750+UL1310 | ||
Withstand voltage | I/P-O/P:1.88KVAC | |||
Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | |||
EMC EMISSION | FCC Part 15 B | |||
others | Net. Weight | 0.4Kg | ||
Size | 212*56*24mm (L*W*H) | |||
packing | 20PCS/CTN SIZE:329*279*176mm(L*W*H)
385*335*200mm 20PCS/CTN | |||
Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
Derating Curve
To extend their life, please refer to the Derating Curve and derate according to the temperature.
Mechanical Specification
Unite: mm
Tolerance: 0.5-2mm
Input with terminals Live(L) and Neutral(N) wires to be connected AC;
Output LED SEC output Positive (LED+) , output negative(LED-). Connected to LED light.
Output terminals DIM (+) to 0/1-10V dimmer signal(+ ),DIM (-) white connect to 0/1-10V dimmer signal (-)
Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.
Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Note: Any other requests we can customized.
Connecting Diagram
Using TRIAC/Phase cut dimming
1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
2. Work with forward phase /leading edge ,MLV and reverse phase /trailing edge ,ELV,TRIAC dimmers.
3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Using 0-10/1-10V dimming （1）
Using 0-10/1-10V dimming （2）
Using 0-10/1-10V dimming （3）
CW Output mode connecting diagram
(Triac dinming)
(0-10/1-10V dimming)
The topology
PFC load graph
Switch mode
Switch to PWM output mode
Works with single channel CCT warm-dim LED strip/tape (2 wires).
Switch to CW output mode
Works with dual channel CW color temperature LED strip/tape (3wires).
Switch to VR output mode
Works with single channel CCT warm-dim LED strip/tape (2 wires).
PWM dimming curve VR dimming curve
C W PWM dimming curve Color temperature curve
Instruction:
1)This driver should be installed by qualified and professional person;
2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
3)Ensure that wiring is correct before test in order to avoid light and power supply damage;
- User name Member Level Quantity Specification Purchase Date
- Satisfaction ：
-
