NameDescriptionContent
  • 30W 12V 24V Non Dimmable Junction Boxed LED Driver
    30W 12V 24V Non Dimmable Junction Boxed LED Driver
    30W 12V 24V Non Dimmable Junction Boxed LED Driver
    ❤ Add to collection
  • 30W 12V 24V Non Dimmable Junction Boxed LED Driver

    90-130Vac/100-277Vac
    constant voltage
    IP54
    5 years
    CE,ROHS,FCC,SELV,ETL

    IP54 non dimmable with junction box  LED Driver 30w

    • U.S.$0.00
      U.S.$0.00
      U.S.$0.00
      U.S.$0.00
    • Satisfaction:

      Sales: 0

      Review: 0

    Weight:0.000KG
    • Quantity:
Description

IP54 non dimmable with junction box  LED Driver 30w


Features : 

·Input Voltage: 90-130V/100-277V 

·Power Range:30-100W 

·High Efficiency: up to 89% ; 

PF>0.95 

·IP54 

·Cooling by free air convection ·Suitable for dry or damp location use

·Protection:Short Circuit/Over Loading /Over Current/ Over Temperature 

·5 years warranty

Model No.PowerOutput VoltageOutput CurrentWeight(kg)Size(L*W*Hmm)Packing

OTM-E30-12J 

OTM-E30-24J

30W

12V

24V

2A

 1.2A

0.603200*45*3728PCS/CTN,28.6*22.5*39.5CM

OTM-E40-12J

 OTM-E40-24J

40W

12V

24V

3A 

1.67A

0.603

200*45*37 24PCS/CTN,28.6*22.5*39.5CM

OTM-E60-12J

OTM-E60-24J

60W

12V

24V

4A

 2.5A

0.776215*51*3714PCS/CTN,28.6*22.5*39.5CM

OTM-E80-12J 

OTM-E80-24J

80W

12V

24V

5.5A 

3.5A

1.121215*51*3714PCS/CTN,28.6*22.5*39.5CM

OTM-E100-12J 

OTM-E100-24J

100W

12V

24V

8.33A

 4.17A

1.121215*51*3714PCS/CTN,28.6*22.5*39.5CM


Specifications

ProtectionShort Circuitshut down o/p voltage, re-power on to recover after fault condition is removed
Over Current≤1.2*Iout
Over Loading≦120% shut down o/p voltage, re-power on to recover
Over temperature100℃± 10℃ shut down o/p voltage ,re-power on to recover
EnvironmentWorking TEMP.-40~+70℃
Working Humidity20~90%RH, non-condensin
Storage TEMP. Humidity-40~+80℃,10~95%R
TEMP .cofficient士0.03%/℃(0~50℃)
Vibration10~500Hz,2G 10min./1 cycle,period for 72min. each along X,Y,Z axes
Safety& EMCSafety standardsUL8750+UL1310 Class 2 unit , EN61347-1 EN61347-2-13
Withstand voltageI/P-O/P:3.75KVAC
Isolation resistanceI/P-O/P:100MΩ/500VDC/25℃/70%R
EMC EMISSIONEN55015,EN61000-3-2,3 (≧60%loading),FCC Part 15 B
Notes1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature

2. Tolerance: includes set us tolerance, line regulation and load regulation .

3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance  will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again

4. Loading range from 10% to 100


Package


Dimensions


Driver Connecting Diagram



Dimming Operation 

※Connect the Dali signal line to the Dali bus of the controller (the Dali Master). After Dali Master scanning and address assignment, the driver can be successfully dimmed. Please refer to Diagram 1 ※Notice:In the market, some DALI controllers has bus-powered functions .If not,please add an extra power supply. (DALI Power) 

※Any incorrect connecting of signal line and output line would damage the master.



Warning
※This driver should be installed by qualified and professional person;
※Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
※Ensure that wiring is correct before test in order to avoid light and power supply damage;
※If driver Cannot work normally, don’t maintain privately; Have any question, please contact us.










  • User name Member Level Quantity Specification Purchase Date
  • Satisfaction :
No evaluation information
Dimmable LED Driver
5 in 1 Dimmable
Triac Dimmable
3 in 1 Dimmable
Dali Dimmable
0/1-10V Dimmable
DALI+PUSH Dimmable
Non Dimmable LED Driver
IP 20
IP 67
Submit product