340W IP67 24V Multi-channels Triac Dimmable LED Driver

Features:

·Output constant voltage

·UL cUL listed, Class 2, Class P, Type HL, FCC, NEMA 4X, CE, RoHS,T24

·Universal input, 110-277Vac 

·Build in active PFC, typical power factor>0.95, THD<10%@120V Max. load

·High efficiency: up to 88%

·Load: 0.01-100%                                        

·Short-circuit, over-temperature, over-load protection                  

·Full protection metal case, for dry, damp, wet locations 

·Flicker-free

·Suitable for LED lighting and moving sign applications 

Product advantage：

Specification

Derating Curve

To extend their life, please refer to the Derating Curve and derate according to the temperature.

To extend their life, please refer to the Derating Curve and derate according to the temperature

Mechanical Specification （340W）

                                                                                                                                                                                                                                                                   Unit:mm

                                                                                                                                                                                                                                                                   Tolerance:0.5-2mm

Input wire Black and White to be connected to AC L and N ,Green wire go ground, 

Output wire Red to LED Positive side (+) , Black  to LED Negative side (-).  

Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.

Note: Any other requests we can customized.

Connecting Diagram

Using TRIAC/Phase cut dimming

1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.

2.Work with forward phase /leading edge ,MLV and reverse phase /trailing edge ,ELV,TRIAC dimmers.

3.Please try to use dimmers with power at least 1.5 times as the output power of the driver. 

Using TRIAC MLV Wiring Diagram

Using TRIAC ELV Wiring Diagram

The topology

PFC load graph

PWM dimming curve 

VR dimming curve

 Instruction:

1)This driver should be installed by qualified and professional person;

2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.

3)Ensure that wiring is correct before test in order to avoid light and power supply damage;