IP20 30W 0-10V Dimmable constant voltage led driver
Features:
Input voltage: 90-130V/180-240V/100-240V
Power Range:12-100w
High Efficiency: up to 89% ; PF>0.95
IP20 Design
Cooling by free air convection
Suitable for dry or damp location use
Multiple protections like short circuit & over-current &over-voltage protection
Compatible with 0/1-10V Dimmers
5 years warranty
Specification:
|
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed |
| Over Loading | ≤120% shut down o/p voltage, re-power on to recover after fault condition is removed |
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
| Environment | Working TEMP. | -40～+70℃ |
| Working Humidity | 20～90%RH, non-condensing |
| Storage TEMP. Humidity | -40～+80℃，10～95%RH |
| TEMP .coefficient | ±0.03%/℃（0～50℃） |
| Vibration | 10～500Hz, 2G 10min./1 cycle,period for 72min. each along X,Y,Z axes |
| Safety& EMC | Safety standards | EN60598 |
| Withstand voltage | I/P-O/P:3.75KVAC |
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH |
| EMC EMISSION | EN55022, EN55015, Class B |
| Noted | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25Cof ambient temperature.
2. To extend the driver' s using life, please reduce the loading at lower input voltage. |
Package
.png)
_2kqh.png)
Connecting Diagram
.png)
Dimming Operation：
※Built-in 0/1-10V dimming function, IP20 rated .Output luminous can be adjusted through output cable by connecting a resistance or 0/1-10Vdc signal between DIM+ and DIM-
※Please DO NOT connect“DIM-”to“LED-”
