Triac/ELV/MLV/Phase-Cut Dimmable led driver 60W
Feature
•Dimming: Triac/ ELV/ MLV /Phase-cut dimming
•Dimming 0-100%
•UL, Class 2 PENDING
•Damp and dry location
•100-130Vac input
•Build in active PFC, typical power factor=0.94
•THD<20%@120V Max. load
•Constant voltage type
•Small size: 84*40*25mm)
•Super low loading request, works perfect at 5-100% load.
•Short-circuit, over-load protection.
•3 years warranty
•compatible with popular dimmers in the market, Lutron-CL, Diva series and so on.
Application
•LED strip/LED tape/LED module
•Residential Lighting
•Commercial Lighting
Series Information
OTMTD60-12mini 60W 12VDC
OTMTD60-24mini 60W 24VDC
OTMTD96-24Vmini 96W 24VDC
Specification
Model Number | OTM-TD60-12Mini | OTMTD60-24Mini |
OUTPUT |
Rated Power | 60W | 60W |
Rated Voltage | 12V | 24V |
Rated Current | 5.0A | 2.5A |
Voltage Tolerance | ±1V |
INPUT |
Voltage Range | 100-130V |
Frequency Range | 47-63Hz |
Power Factor(typ.) | 0.94@120VAC |
Total Harmonic Distortion | THD< 20%(@100% load) |
Efficiency(Typ.) | 88%@120VAC |
AC Current(Typ.) | 0.75A |
Leakage Current | <0.5mA/ 120VAC |
PROTECTION |
Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. |
Over Load | Reduce the output voltage and output power, auto-recovery or re-power on to recovery |
ENVIRONMENT |
Working Temp. | Tcase=-40 ~ +60 (Please refer to“OUTPUTLOAD vs TEMPERATURE”section) |
Working humidity | 20 ~ 95% RH non-condensing |
Storage temp., Humidity | -40 ~ +90, 10 ~ 95% RH |
Temp .coefficient | ±0.03%/℃(0~50℃) |
Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
SAFETY & EMC |
Safety standards | UL8750, Class 2 |
Withstand voltage | I/P-O/P:1.88KVAC |
OTHERS |
Dimension | 84*40*25mm (L*W*H) |
Packing | 0.18Kg; 50pcs / 6.5Kg / Carton: 11x8.5x7.7inch |
Mechanical Diagram
Product size:84*40*25mm
18AWG for cables
Wiring Diagram
Load vs Ambient Temperature
Warning
This driver should be installed by qualified and professional person;
Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
Ensure that wiring is correct before test in order to avoid light and power supply damage;
If driver Cannot work normally, don’t maintain privately; Have any question, please contact us.