30W 5 in1 dimmable led driver IP20 plastic housing
·UL cUL listed, Class 2, Class P, Type HL, FCC, NEMA 4X, CE, RoHs
·Universal input, 110-277Vac
·Build in active PFC, typical power factor>0.95, THD<20%@120V Max. load
·Load: 0.01-100%
Spec Sheet Download
30w constant voltage 12V/24V Triac/0-10V/1-10V/Potentiometer/10V PWM 5 in 1 Dimmable led driver
Features:
Output constant voltage UL cUL listed, Class 2, Class P, Type HL, FCC, NEMA 4X, CE, RoHs Universal input, 110-277Vac Build in active PFC, typical power factor>0.95 THD<20%@120V Max. load High efficiency : up to 80% Load: 0.01-100% Short-circuit, over-temperature, over-load protection Plastic enclosures can be used indoors or for dry, damp location Flicker-free Suitable for LED lighting and moving sign applications
•Triac dim mode: Forward phase & reverse phase, MLV, ELV dim
•Flexible wiring compartment to adjust the AC and DC wiring space
•Title 24 JA8 compliant
•Constant voltage type, fine tune of output voltage
•Super low loading request, works perfect at 0.01-100% load.
•7 years warranty
•Dimming range: 100%-0.01% Ultra Deep Amplitude
•No Vpeak-peak during driver on/off and dimming, no harm to the LED for long-term using, and slow down the speed of
.lumen depreciation.
•Works with single channel CCT warm-dim LED strip/tape (2 wires).
•Switching different output mode, can be compatible with more different types of LED lamps
•Compatible with DC-DC design LED fixture, such as MR16, PAR, wall washer, linear lighting, LED strip/type
Specification
Model
OTM-VPA30-E12
OTM-VPA30-E24
OTM-VPA30-E36
OTM-VPA30-E48
Certificates
UL, cUL listed, Class 2 unit, Type HL rated, FCC
Output
DC Voltage
12V
24V
36V
48V
Rated Current
2.5A
1.25A
0.83A
0.625A
Rated Power
30W
30W
30W
30W
Voltage Tolerance
±0.5V
Voltage Regulation
±0.5%
Load Regulation
±1%
Input
Voltage Range
110-277VAC
Frequency Range
47-63Hz
Power Factor（Typ.）@ full load
0.99@120VAC 0.95@277VAC
THD（Typ.）@ full load
<20% @120VAC &277VAC
Efficiency（Typ.）@ full load
12V/24V 79% @120Vac 80%@277Vac
36V/48V 80% @120Vac 81%@277Vac
AC Current（Max.）
0.5A@110Vac
Inrush Current （Typ.）
7A, 50%, 420us @120Vac 12A, 50%, 480us @277Vac
Leakage current
<0.50mA
Protection
Short Circuit
shut down o/p voltage, re-power on to recover after fault condition is removed
Over Loading
≤120% shut down o/p voltage, re-power on to recover after fault condition is removed
Over temperature
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Environment
Working TEMP.
-40～+60℃ (see below derating curve)
Working Humidity
20～90%RH, non-condensing
Storage TEMP. Humidity
-40～+80℃，10～95%RH
TEMP .coefficient
±0.03%/℃（0～50℃）
Vibration
10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
Safety& EMC
Safety standards
UL8750+UL1310
Withstand voltage
I/P-O/P:1.88KVAC
Isolation resistance
I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
FCC Part 15 B
others
Net. Weight
0.21Kg
Size
158*54*20mm (L*W*H)
packing
40PCS/CTN
Notes
1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage.
Derating Curve
To extend their life, please refer to the Derating Curve and derate according to the temperature.
To extend their life, please refer to the Derating Curve and derate according to the temperature
Mechanical Specification:
Unit:mm
Tolerance:0.5-2mm
Input with terminals Live(L) and Neutral(N) wires to be connected AC
Output wire Red to LED Positive side (+) , Black to LED Negative side (-).
Dimming cable DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Pink to 0/1-10V dimmer signal (-)
Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.
Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Note: Any other requests we can customized.
Connecting Diagram
Using TRIAC/Phase cut dimming
1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
2.Work with forward phase /leading edge ,MLV and reverse phase /trailing edge ,ELV,TRIAC dimmers.
3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Using 0-10/1-10V dimming(1)
Using 0-10/1-10V dimming(2)
Using 0-10/1-10V dimming(3)
The topology
PFC load graph
PWM dimming curve
VR dimming curve
Instruction:
1)This driver should be installed by qualified and professional person;
2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
3)Ensure that wiring is correct before test in order to avoid light and power supply damage;
User name Member Level QuantitySpecificationPurchase Date
