IP20 Round shape Dali dimmable constant voltage LED Driver
Features :
·Input Voltage: 90-130V/180-240V/100-240V
·Power Range:12-80W
·High Efficiency: up to 89% ; PF>0.95
·IP20 Design
·Cooling by free air convection
·Suitable for dry or damp location use
·Multiple protections like short circuit& over-current & over-voltage
·Compatible with Dali Dimmers
·5 years warranty
| Model No. | Power | Output Voltage | Output Current | Weight(g) | Size(L*W*Hmm) | Packing |
OTM-DDR12 | 12W
| 12v 24v | 1A 0.5A | 70g | D67*21 | 29*23*39.5CM,90PCS/CTN |
OTM-DDR20 | 20W | 12v 24v | 1.5A 0.83A | 70g | D67*21 | 29*23*39.5CM,90PCS/CTN |
OTM-DDR30 | 30W | 12v 24v | 2A 1.25A | 100g | D73*27 | 32.5*21*38.5CM,68PCS/CTN |
OTM-DDR40 | 40W
| 12v 24v | 3A 1.7A | 145g | D79*31 | 29*23*39.5CM,36PCS/CTN |
OTM-DDR60 | 60W | 12v 24v | 4A 2.5A | 220g | D102*31 | 32.5*21*38.5CM,36PCS/CTN |
OTM-DDR80 | 80W | 12v 24v | 5.5A 3.5A | 220g | D102*31 | 32.5*21*38.5CM,36PCS/CTN |
Specifications
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed |
| Over Current | ≤1.2*I out |
| Over Loading | ≦120% shut down o/p voltage, re-power on to recover |
| Over temperature | 100℃± 10℃ shut down o/p voltage ,re-power on to recover |
| Environment | Working TEMP. | -40～+70℃ |
| Working Humidity | 20～90%RH, non-condensing |
| Storage TEMP. Humidity | --40～+80℃，10～95%RH |
| TEMP .coefficient | ±0.03%/℃（0～50℃） |
| Vibration | 10～500Hz，2G 10min./1 cycle,period for 72min. each along X,Y,Z axes |
| Safety& EMC | Safety standards | UL8750+UL1310 Class 2 unit , EN61347-1 EN61347-2-13 |
| Withstand voltage | I/P-O/P:3.75KVAC |
| Isolation resistance | I/P-O/P：100MΩ/500VDC/25℃/70%RH |
| EMC EMISSION | EN55015,EN61000-3-2,3 (≧60%loading),FCC Part 15 B |
| Notes |
All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature. Tolerance: includes set us tolerance, line regulation and load regulation . The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again Loading range from 10% to 100%
|
Package
Dimensions
Driver Connecting Diagram
