| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition removed |
| Over Loading | 30W: ≤120% shut down o/p voltage, re-power on to recover after fault condition removed
60W/300W: ≤120% Hiccup mode,recovers automatically after fault condition is removed
80W-120W: ≤120% constant current limiting, auto-recovery |
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
| Environment | Working TEMP. | -40～+60℃ |
| Working Humidity | 20 - 95%RH,non-condensing |
| Storage TEMP. Humidity | -40～+80℃，10～95%RH |
| TEMP .cofficient | ±0.03%/℃（0～50℃） |
| Vibration | 30W-60W: 10～500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes
80W-300W: 10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
| Safety& EMC | Safety standards | UL8750 +UL1310,CAN/CSA-C22.2 No.250.13
EN61347-1 EN61347-2-13 |
| Withstand voltage | I/P-O/P:1.88KVac |
| Isolation resistance | I/P-O/P：100MΩ/500VDC/25℃/70%RH |
| EMC EMISSION | FCC 47 CFR Part 15 Subpart B, EN55015,EN61000-3-2,3 (≧60%loading) |
| Notes | 1. All parameters NOT specially mentioned are measured at 120VAC input , rated load and 25℃ of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
3.
The power supply is considered as a component that will be operated in
combination with final Equipment. Since EMC performance will be affected
by the complete installation, the final equipment manufactures must
be-qualify EMC Directive on the complete installation again. |
