NameDescriptionContent
  • 36W
    ❤ Add to collection
  • 36W

     0/1-10V PMW (3 in 1)  dimmable  Constant Voltage  LED Driver High PF IP20 Slim Linear Led Driver

    Spec Sheet Download

    • U.S.$0.00
      U.S.$0.00
      U.S.$0.00
      U.S.$0.00
    • Satisfaction:

      Sales: 0

      Review: 0

    Weight:0.00KG
    • Quantity:
Description

 0/1-10V PMW (3 in 1)  dimmable  Constant Voltage  LED Driver High PF IP20 Slim Linear Led Driver

Spec Sheet Download


Input Voltage: 100-277VAC & 180-240VAC
Power Range:30-150W
High Efficiency: up to 86% ; PF>0.95
IP20 Design; Flicker-free
Cooling by free air convection
Suitable for dry or damp location use
Compatible with 0-10V,1-10V, PWM ,Potentiometer dimming
Protection:short circuit/over loading/over current/ Over temperature
7 years warranty



Model No.PowerOutput VoltageOutput CurrentWeight(kg)Size(L*W*Hmm)Packing

OTM-PD30-S12-F
OTM-PD30-S24-F

30W

12V

24V

2.5A
1.25A

0.2260*30*18.5330*270*130mm,50pcs /CTN

OTM-PD36-S12-F
OTM-PD36-S24-F

36W

12V

24V

3A
1.5A

0.2260*30*18.5330*270*130mm,50pcs /CTN

OTM-PD60-S12-F
OTM-PD60-S24-F

60w

12V

24V

5A
2.5A

0.3300*30*18.5
330*330*130mm,50pcs /CTN

OTM-PD96-S24-F

96w

12V

24V

4A

0.5

330*30*22350*330*145mm,50pcs /CTN

OTM-PD100-S12-F
OTM-PD100-S24-F

100W

12V

24V

8.33A
4.17A

0.5330*30*22 350*330*145mm,50pcs /CTN

OTM-PD150-S12-F
OTM-PD150-S24-F

150W

12V

24V

12.5A
6.25A

0.6368*30*22.5385*330*145mm,50pcs /CTN


Specifications

ProtectionShort Circuitshut down o/p voltage, re-power on to recover after fault condition is remove
Over Current≤1.2*Iout
Over Loading≤≦120% shut down o/p voltage, re-power on to recover
Over temperature100℃± 10℃ shut down o/p voltage ,re-power on to recover
EnvironmentWorking TEMP.-40~+70℃
Working Humidity20~90%RH, non-condensin
Storage TEMP. Humidity-40~+80℃,10~95%RH
TEMP .cofficient±0.03%/℃(0~50℃)
Vibration10~500Hz,2G 10min./1 cycle,period for 72min. each along X,Y,Z axes
Safety& EMCSafety standardsUL8750+UL1310 Class 2 unit , EN61347-1 EN61347-2-13
Withstand voltageI/P-O/P:3.75KVAC
Isolation resistanceI/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSIONEN55015,EN61000-3-2,3 (≧60%loading),FCC Part 15 B
Notes

1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature.

2. To extend the driver's using life ,please reduce the loading at lower input voltage.

3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again
4. Loading range from 10% to 100%


Package


Dimensions


Driver Connecting Diagram



Dimming Operation

※Built-in 3 in 1 dimming function,Output luminous can be adjusted through output cable b connecting a resistance or 0/1-10Vdc or 10V PWM signal between DIM+ and DIM-.
※Please DO NOT connect "DIM-"to "LED-"



Warning
※1)This driver should be installed by qualified and professional person;
※2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
※3)Ensure that wiring is correct before test in order to avoid light and power supply damage;
※4)If driver Cannot work normally, don’t maintain privately; Have any question, please contact us.s.













  • User name Member Level Quantity Specification Purchase Date
  • Satisfaction :
No evaluation information
Dimmable LED Driver
5 in 1 Dimmable
Triac Dimmable
3 in 1 Dimmable
Dali Dimmable
0/1-10V Dimmable
DALI+PUSH Dimmable
Non Dimmable LED Driver
IP 20
IP 67
Submit product