96W 24V JUNCTION BOX Dimmable Driver Support Dimming Linear Bicolor

96W 5 in 1 Dimmable LED driver with Juntion box Supports dimming linear bicolor Triac/0-10V/1-10V/Potentiometer/10V PWM

Features:

·Output constant voltage

·UL cUL listed, Class 2, Class P, FCC, CE, RoHs, T24, SAA

·Universal input, 110-277Vac 

·Build in active PFC, typical power factor>0.95, THD<10%@120V Max. load

·High efficiency: up to 90%

·Load: 0.01-100%                                        

·Short-circuit, over-temperature, over-load protection                  

·Full protection metal case, for dry, damp, and wet locations 

.Plastic enclosures can be used indoors

·Flicker-free

·Suitable for LED lighting and moving sign applications  

Product advantage：

Derating Curve

                                                                                                                           To extend their life, please refer to the Derating Curve and derate according to the temperature.

Mechanical Specification 

                                                                                                                                                                                                                                              Unite: mm

                                                                                                                                                                                                                                              Tolerance: 0.5-2mm

Input wire Black and White to be connected to AC L and N ,Green wire go ground, 

Output wire Red to LED Positive side (+) , Black  to LED Negative side (-).  

Dimming cable DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Pink to 0/1-10V dimmer signal (-)  

Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.

Note: Any other requests we can customized.  

Connecting Diagram 

Using TRIAC/Phase cut dimming

1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.

2. Work with forward phase /leading edge ,MLV and reverse phase /trailing edge ,ELV,TRIAC dimmers. 

3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.

UsingTriac MLV wiring diagram

UsingTriac ELV wiring diagram

Using 0-10/1-10V dimming (The power supply does not pass through the dimmer)

Using 0-10/1-10V dimming(Power supply through dimmer switch)

Using 0-10/1-10V dimming(The dimmer is not connected to high voltage)

CW Output mode connecting diagram (Triac dimming)

0-10/1-10V dimming

The topology

PFC load graph

Switch mode

Switch to PWM output mode

Works with single channel CCT warm-dim LED strip/tape (2 wires).

Switch to CW output mode

Works with dual channel CW color temperature LED strip/tape (3wires). 

Switch to VR output mode

Works with single channel CCT warm-dim LED strip/tape (2 wires).

PWM dimming curve                                                                                                                                 VR dimming curve

C W PWM dimming curve                                                                                                                       Color temperature curve

Instruction:
1)This driver should be installed by qualified and professional person;
2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
3)Ensure that wiring is correct before test in order to avoid light and power supply damage;