Input Voltage: 90-130VAC/180-240VAC
Power Range:12-80W
LED DRIV
High Eficiency: up to 89% ; PF>0.95
IP20 Design
Cooling by free air convection
Suitable for dry or damp location use
Protection:short circuit/over loading/over current/ Over temperature
Compatible with Forward phase, Reverse phase, Triac, MLV, ELV Dimmers
5 years warranty
| Model No. | Power | Output Voltage | Output Current | Weight | Size(L*W*Hmm) | Packing |
OTM-TD12-R12 OTM-TD12-R24 | 12W | 12V 24V | 1A 0.5A | 50g | 67*21 | 29* 23*40CM,112PCS/CTN |
OTM-TD20-R12 OTM-TD20-R24 | 20W | 12V 24V | 1.5A 0.83A | 69g | 67*21 | 29*23*40CM,112PCS/CTN |
OTM-TD30-R12 OTM-TD30-R24 | 30w | 12V 24V | 2A 1.25A | 100g | 73*27 | 33*21*39CM,90PCS/CTN |
OTM-TD40-R12 OTM-TD40-R24 | 40w | 12V 24V | 3A 1.7A | 145g | 79*31 | 29*23*40CM,68PCS/CTN |
OTM-TD60-R12 OTM-TD60-R24 | 60W | 12V 24V | 4A 2.5A | 220g | 102*31 | 29*2340CM,36PCS/CTN |
OTM-TD80-R12 OTM-TD80-R24 | 80W | 12V 24V | 5.5A 3.5A | 220g | 102*31 | 33*21*39CM,36PCS/CTN |
Specifications
| Protection | Short Circuit | Intermittent restart mode, ater the exception can be automatially restored |
| Over Current | Hiccup mode, after the remowal of abnormal flow can be automatically restored |
| Environment | Working TEMP. | -30~+45*C |
| Working Humidity | 5~95%RH |
| Storage TEMP. Humidity | -40~+70*C，5~95%RH |
| TEMP .cofficient | 士0.03%/°C (0~50°C) |
| Vibration | 5-55Hz/2g.30 Mimute |
| Safety& EMC | Safety standards | EN60598 |
| Withstand voltage | I/P- 0/P:3KVAC IP FG1.88KVAC 0/P.FG0.5KVAC |
| Isolation resistance | I/P-0/P I/P FG 0/P F:100MΩ/500VDC/25C/70%RH |
| EMC EMISSION | EN55022, EN55015 Class B |
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input, rated load and 25°Cof ambient tem perature. 2. To extend the drive's using life ,please reduce the loading at lower input voltage. |
Package
Dimensions
Driver Connecting Diagram
Dimming Operation
※The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
※Usually matching with leading edge/Forward Phase Triac Dimmers( Can customized as a driver only matching trailing edge/reverse phase Triac Dimmers if needed).
※Please try to use dimmers with power at least 2.5 times as the output power of the driver.
※for Forward phase,Magnetic low voltage and Triac Dimmers
Warning
Warning
※Prevent to reverse polarity;
※Risk of Electric Shock. When used outdoors, install only on a circuit protected by a Class A GFCI;
※Risk of Fire. Istallation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician;
※Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.
